Android 10 Download for Exynos Galaxy S10e, S10, and S10 Plus One UI 2.0 beta [OTA update zip]

The Korean OEM has officially launched the Android 10 Download for Exynos Galaxy S10e, S10, and S10 Plus One UI 2.0 beta in the European region. Updates have started being received by Exynos variants of Galaxy S10 who have registered for the Beta update. In case you have not yet signed up, you can do so through the Samsung Member’s app and then register before the slots fill up.

This Android 10 Beta program from Samsung is currently running in South Korea and Europe. Exynos Galaxy S10e, S10, S10 Plus devices are now getting the official One UI Beta 2.0 OTA update. This latest firmware is based on Android 10 feature has build numbers – G970FXXU3ZSJ8 for the Galaxy S10e (SM-G970F), build G973FXXU3ZSJ8 for the S10 (SM-G973F), and G975FXXU3ZSJ8 for the Galaxy S10+ (SM-G975F).

Download Official Android 10 OneUI 2.0 for Galaxy S10e/S10/S10+

Here are the links to download the official Android 10 OneUI 2.0 For Samsung Galaxy S10 series. Although this update is only prevailing currently in Germany, you can manually install it anytime on your Samsung Galaxy S10.

Here are the OTA updates for the complete global Galaxy S10 series. The official Beta 1 for the Exynos S10 going from build ASII to ZSJ8. Thus if your device needs to be on the Android 9 Pie ASII firmware in order to flash the Android 10 beta OTA update zip.

But before that, here are the notes for Eligible devices, Eligible OXM Multi CSC Builds and for single as well –

Notes for Eligible devices – The update zips are only for MULTI-CSC OXM. You can check this by dialling using your phone app at – *#1234#, and see if OXM is in the CSC-build.

Eligible OXM multi CSC builds are –

(ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )

And for single –

(BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )

Download Open Beta 3 latest for OnePlus 7 (Pro) based on Oxygen OS 10 (1)

Downloads from Samsung Servers –

Exynos Galaxy S10 Plus One UI 2.0 

Download G975FXXU3ASII to ZSJ8 update.zip

Exynos Galaxy S10 One UI 2.0 

Download G973FXXU3ASII to ZSJ8 update.zip

Exynos Galaxy S10e One UI 2.0 

Download G970FXXU3ASII to ZSJ8 update.zip

Also, see the below as you will need –

Update Samsung Galaxy S10 to Android 10 One UI 2.0

You can download the OTA Zip from above and then install it either by suiStock Recover Method or ADB Sideload method.

Requirements –

Stock Recovery Method  (OTA update zip installation)

Step 1. For this method to follow, you should have a Samsung Galaxy S10/S10 Plus running on Android 9.0 Pie. In case you are using the ASII Software version on your device then you do not have to follow this step.

Also check Install Stock Firmware on Samsung Galaxy Note 8 using Odin Tool

Step 2. Download ASII ZSJ8 OTA update zip from above. Then Rename it as update.zip and move this file to the PC or whichever system you are using i.e. Mac or Linux. Make sure to have a copy of this update zip on the storage of your device or SD Card.

Step 3. Now reboot the Samsung Galaxy S10 series device into Recovery Mode. For this, simply turn of your device completely and then press and hold down the Power + Volume Up + Bixby buttons altogether.

Step 4. When you have entered the stock recovery mode, make use of the volume buttons to navigate and choose – “apply update from SD card“.

Step 5. Go to the update zip file (ASII -> ZSJ8 ) in SD card and press the power button to choose it.

Step 6. The Update will now begin. It may take some while just be patient until then. Now that you have finished the step, repeat the same for the further OTA Updates like beta 2, beta 3, and more update.zip.

Use the below command to reboot into Recovery Mode –

adb reboot recovery

In case you do not have an SD Card option, you can use the ADB Sideload method which has been described below.

Must see – Latest Samsung Good Lock September 2019 updated APK with notification ring for Note 10+ and lots

ADB Sideload Method

Follow the step number from 1 to 3 and then choose ‘Apply Update from adb’ in the fourth step.

Step 1. Assuming that you have followed steps 1 to 3 from the above method, we will get to the next part. Now connect your Android device to the PC and open a terminal window or command prompt on it where you have installed the OTA Zip. For this, just type cmd on the search bar and then press the Enter key.

Step 2. Navigate to Device Recovery and choose ‘Apply Updates from ADB.

Step 3. Now go to the location where you have saved the OTA Zip file on the PC. Now flash the OTA by entering the below command – Just remember to put the actual filename in-between ‘< >’, and also the exact name with it proper extension. Do not use ‘< >’ in the actual command.

adb sideload <filename>.zip

For Mac users –

“./adb sideload <filename>.zip’

For Linux –

“sudo adb sideload <filename>.zip”

Step 4. Confirm your action and be patient until the upgrade is completed.

Lastly, just reboot your device.

Hope the article was of use. In case of any doubts, let us know in the comment section below.

Happy Androiding 🙂

1 thought on “Android 10 Download for Exynos Galaxy S10e, S10, and S10 Plus One UI 2.0 beta [OTA update zip]”

Leave a Comment

We are hiring Writers Join Here
+ +
Read previous post:
Download Open Beta 3 latest for OnePlus 7 (Pro)
Download Open Beta 3 latest for OnePlus 7 (Pro) based on Oxygen OS 10

Just recently OnePlus released the OnePlus 10.0.1 HotFix Firmware update for the OnePlus 7 and 7 Pro. This update is...

Close