OneUI 2.0 Android 10 Beta 3 download for Snapdragon Galaxy S10 Plus [US Variants]

Recently the Snapdragon Galaxy S10 Plus received the Android 10 OTA OneUI 2.0 Beta Update for the T-Mobile Variants, etc. And now we have the next Beta 3 level Update for the Snapdragon Galaxy S10 Plus US Mobile Variants. In this article we are sharing the links to download Android 10 Beta 3 download for Snapdragon Galaxy S10 Plus US Variants along with the installation guide.

OneUI 2.0 Android 10 Beta 3 download for Snapdragon Galaxy S10 Plus [US Variants]

Download OneUI 2.0 Android 10 Beta 3 for Snapdragon Galaxy S10 Plus [US Variants]

One can manually update the OneUI 2 Beta 3 update by downloading the links given below and then installing it with the help of different methods mentioned below. OneUI Beta 3 update will move the base firmware G975USQU2ZSJF (beta 2) to G975USQU2ZSK3 (beta 3).

Snapdragon Galaxy S10 Plus One UI 2.0 –

Download G975USQU2ZSJF-to-U2ZSK3

Mega mirror

Earlier One UI Beta For Snapdragon Galaxy S10 Plus

Android 10 Download for Snapdragon Galaxy S10+ One UI 2.0 beta OTA update zip [T-Mobile USA]

NOTES for eligible devices – The update zip file should work on all the T-Mobile, Sprint, AT&T, Verizon variants; provided that your device fulfils the requirements.

The below files might be needed –

MUST READ  Download One UI 2.0 based Android 10 Beta 6 for Samsung Galaxy S9 and S9 Plus

Firmware downloads –

  • Galaxy S10+ G975USQS2BSI4 (sammobile)
  • Galaxy S10 G973USQS2BSI4
  • Galaxy S10e G970USQS2BSI4

How to Update Samsung Galaxy S10+ (Snapdragon) to Android 10 One UI 2.0 Beta 3

The Android 10 OneUI 2.0 Beta 3 update has been released to many users having the T-Mobile Galaxy S10+ variant. It should also work on other Galaxy S10+ variants that include carriers like AT&T, Verizon, Sprint, and T-Mobile. The Size of this update is 939 MB and hence we recommend you installing it over a WiFi connection.

If you are on the OneUI Beta 2 but have not received the Beta 3 update notification yet, you can follow the below steps to update your Samsung Galaxy S10 series device to OneUI 2.0 Beta 3 Update officially. You can download the OTA Zip from above and then install it either by using Stock Recovery Method or ADB Sideload method.

Requirements –

Stock Recovery Method  (OTA update zip installation)

  • For this method to follow, you should have a Samsung Galaxy S10/S10 Plus running on Android 9.0 Pie G975USQS2BSI4 build.
  • Download G975USQS2BSI4-to-U2ZSJ8 OTA update zip from above. Then Rename it as and move this file to the PC or whichever system you are using i.e. Mac or Linux.
  • Make sure to have a copy of this update zip on the storage of your device or SD Card.
  • Now reboot the Samsung Galaxy S10 series device into Recovery Mode. For this, simply turn of your device completely and then press and hold down the Power + Volume Up + Bixby buttons altogether.
  • When you have entered the stock recovery mode, make use of the volume buttons to navigate and choose – “apply update from SD card“.
  • Go to the update zip file (BSI4-to-ZSJ8 ) in SD card and press the power button to choose it.
  • The Update will now begin. It may take some while just be patient until then. Now that you have finished the step, repeat the same for the further OTA Updates like beta 2, beta 3, and more

Use the below command to reboot into Recovery Mode –

MUST READ  Download Samsung Galaxy Note 20 Wallpapers and Live Wallpapers!

adb reboot recovery

Do not miss – Download Stock Firmware for Samsung Galaxy S10e/S10/S10+ update via Odin FlashTool

In case you do not have an SD card option, you can use the ADB Sideload method which has been described below.

ADB Sideload Method

Follow the step number from 1 to 3 and then choose ‘Apply Update from adb’ in the fourth step.

Step 1. Assuming that you have followed steps 1 to 3 from the above method, we will get to the next part. To start with,connect your Android device to the PC.

Step 2. Now Open a terminal window or command prompt on it where you have installed the OTA Zip. For this, just type cmd on the search bar and then press the Enter key.

Step 3. Navigate to Device Recovery and choose ‘Apply Updates from ADB.

Step 4. Go to the location where you saved the OTA Zip file on the PC.

Step 5. Now flash the OTA by entering the below command – Just remember to put the actual filename in-between ‘< >’, and also the exact name with it proper extension. Do not use ‘< >’ in the actual command.

adb sideload <filename>.zip

For Mac users –

“./adb sideload <filename>.zip’

MUST READ  Samsung Galaxy Note 20 Ultra started Receiving September Security Patch Update including various Improvements

For Linux –

“sudo adb sideload <filename>.zip”

Step 6. Now Confirm your action and wait till the upgrade finishes.

Step 7. Reboot your device.

I assume that the article was useful. If you have any doubts, do let us know in the comment section below. For more such amazing posts, stay tuned with Android Jungles.

Happy Androiding 🙂

Leave a Comment