Android 10 OneUI 2.0 Beta 3 OTA Update for Samsung Galaxy S9 & S9+ Download

Android 10 Beta 3 OTA Update for Samsung Galaxy S9 & S9+ along with January 2020 Security Patch is now rolling out in the regions of Europe and Asia. The One UI 2.0 from Samsung was unveiled in the SDC19 that took place a month ago and now we have the same beta program for Galaxy S9/S9+ out for download.

Recently we had the Android 10 stable update for Samsung Galaxy S10 and Note 10 globally for Exynos variants and in the US for Snapdragon variants. The Beta 3 update for Galaxy S9 series devices also brings along the January 2020 Security Patch update. Here are the download links for the latest One UI 2.0 Beta 3 Android 10 OTA Update for Galaxy S9/S9+.


Build Numbers for the OneUI 2.0 Beta 3 Update –

  • Exynos Galaxy S9 – G965FXXU7ZSL9
  • Exynos Galaxy S9+ – G960FXXU7ZSL9

Update Log of the Android 10 Beta 3 OTA Update

Bug fixes with ZSL9 update –

  • Samsung Pass fingerprint bounces on the Internet
  • Fixed mic position feature to support screen recording
  • Fixed the blur issue when split-mode
  • Updated Samsung apps


Download Android 10 OneUI 2.0 Beta 3 OTA Update for Samsung Galaxy S9 & S9+

Here are the links to download the latest Android 10 OneUI 2.0 Beta 3 OTA Update along with the January 2020 Security patch. The size of these updates is near around 365 MB and hence downloading it over Internet connection would not be an issue. Thus we can say this update is very small and probably might be the last beta update to follow before the stable update rolls out.

Exynos Galaxy S9+ One UI 2.0

Download G965FXXU7ZSL2 to ZSL9 update zip

Exynos Galaxy S9 One UI 2.0 

Download G960FXXU7ZSL2 to ZSL9 update zip

Update Galaxy S9/S9+ to Android 10 Beta 3 OTA Update

The simplest way to update your Exynos Galaxy S9 devices would be by using the Samsung Members app. But, if you are in a region where this update has not yet been rolled out, say out of Asia or Europe, you can download the OTA zip from above and then install it either by using the Stock Recovery Method or ADB Sideload method.

Prerequisites –

Also, check Install Stock Firmware on Samsung Galaxy Note 8 using Odin Tool.

Stock Recovery Method  (OTA update zip installation)

  1. For this method to follow, you should have a Samsung Galaxy S9/S9 Plus. In case you are using the ASII Software version on your device then you do not have to follow this step.
  2. Download ASII ZSJ8 OTA update zip from above. Then Rename it as and move this file to the PC or whichever system you are using i.e. Mac or Linux.
  3. Make sure to have a copy of this update zip on the storage of your device or SD Card. Now reboot the Samsung Galaxy S9 series device into Recovery Mode.
  4. For this, simply turn off your device completely and then press and hold down the Power + Volume Up + Bixby buttons altogether.
  5. When you have entered the stock recovery mode, make use of the volume buttons to navigate and choose – “apply update from SD card“.
  6. Go to the update zip file (ASII -> ZSJ8 ) in the SD card and press the power button to choose it.
  7. The Update will now begin. It may take some while just be patient until then. Now that you have finished the step, repeat the same for the further OTA Updates like beta 2, beta 3, and more

Use the below command to reboot into Recovery Mode –

adb reboot recovery

In case you do not have an SD card option, you can use the ADB Sideload method which has been described below.

Must see – Latest Samsung Good Lock September 2019 updated APK with notification ring for Note 10+ and lots

ADB Sideload Method

Follow the step number from 1 to 3 and then choose ‘Apply Update from ADB’ in the fourth step.

  • Assuming that you have followed steps 1 to 3 from the above method, we will get to the next part.
  • Now connect your Android device to the PC and open a terminal window or command prompt on it where you have installed the OTA Zip. For this, just type cmd on the search bar and then press the Enter key.
  • Navigate to Device Recovery and choose ‘Apply Updates from ADB.
  • Now go to the location where you have saved the OTA Zip file on the PC. Now flash the OTA by entering the below command – Just remember to put the actual filename in-between ‘< >’, and also the exact name with its proper extension. Do not use ‘< >’ in the actual command.

adb sideload <filename>.zip

For Mac users –

“./adb sideload <filename>.zip’

For Linux –

“Sudo ADB sideload <filename>.zip”

  • Confirm your action and be patient until the upgrade is completed.
  • Lastly, just reboot your device.

I hope the article was useful and that you have successfully updated your Exynos S9 devices by following the above methods.

Happy Androiding:-)

1 thought on “Android 10 OneUI 2.0 Beta 3 OTA Update for Samsung Galaxy S9 & S9+ Download”

Leave a Comment

By Downloading Help us Make more content For You